Baader Universal Photo-T-Adapter C90 for NX4/ETX - with 1¼'' filter thread
  Zoom

Baader Universal Photo-T-Adapter C90 for NX4/ETX - with 1¼" filter thread

£46.00
  (1 Review)
✓ 2 year warranty

:  

1x in stock shipped 1-2 working days

About this product

Model:  baad_uni-pho-adptr-2958500
Part Number:  2958500

This useful Universal Adapter from Baader Planetarium serves two purposes: 

1. Enables you to fit either T2 or 2" SCT threaded photo-visual accessories to Celestron Nexstar 4SE, C90 or Meade ETX telescopes. 

2. Serves as a low-profile (7mm optical length) 2” SCT-T2 adapter, enabling you to fit T2-threaded photo-visual accessories to most SCT telescopes. 

Comprises two parts

Part a: Converts the back of Celestron Nexstar 4SE, C90 or Meade ETX telescopes to standard 2” SCT so enabling you to fit photo-visual accessories intended for SCT telescopes (i.e. a diagonal or focuser).  Also accepts 1.25” astro photo/visual filters, i.e a light-pollution-reduction filter or UV/IR (using a filter usefully prevents dust and moisture from entering the rear of the telescope).  

Length: 10mm

Part b: Has as a female SCT thread on the telescope side and a male T2 thread on the other so is essentially a low profile SCT-T adapter.  Also, when used with Part-a, it converts the non-standard thread on Celestron Nexstar 4SE, C90 or Meade ETX telescopes to a T2 thread. The T2 threaded ring can be rotated for convenience.

Optical Length: 7mm

When part-a & b are used together the total physical length is 26.5mm


Please note: Manufacturers sometimes change the thread specifications used on their telescopes for their own convenience so we cannot guarantee compatibility, if found to be unsuitable you are welcome to return the Universal Adapter within 30-days of receipt for a full refund. 

Customer reviews

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating (max 5):  
Great replacement for Celestron LAR on vintage C90 MAK Scope allowing use of all 2" and 1.5" accessories.
08 July 2021  | 

Being interested in the the rare and obscure ( I have nearly all the TAL scopes) , I recently purchased a vintage Celestron C90 Mak scope which is designed for 0.965 diagonal/eyepieces and accessories. The Celestron LAR (Large Accessory Ring) which adapts the rear 1.375" thread to 2" SCT are as rare as hens teeth so after some great advice from Ian at FLO I purchased the Baader UPA. It 100% fits the rear on my C90 and I now have a totally transformed Mak which I can use all of my 2" and 1.5 inch eyepieces and accessories with. I also have the ability to mount my SLR directly using the SCT-T mount part of the UPA which is a bonus. All in all a very pleased customer; great advice and service from FLO.

FAQ

Please fill in the form below to ask a question.

*
*
*
*
Please add the two numbers