Perfect for my mono planetary set up. Nice and light. Great quality.

Great addition , works seamlessly with ASIAIR , no light leaks )) very speedy deliv by FLO as always .

This ZWO device mates perfectly with my ASI 1600 MM Pro camera. The camera 42mm nosepiece only protrudes 0.5mm beyond the F.W. end plate - thus avoiding and interaction with the rotating filter carrier. Similarly the threaded portion of the Antila filters do not protrude beyond the rotating plate. Consequently, it is very straightforward to install the filters. The ASCOM driver was downloaded from the ZWO site and installed, and control of the filter in use from the Nebulosity environment functioned directly, after assigning labels to the filter positions. In summary, a solid unit which was easy to instal and bring into service.

I'm absolutely so impressed with this filter wheel I used it with my redcat 51 and 533mc pro.
the eaf and asi air plus. I must admit I'm not the most technical person but I just plugged it in and it all fired up and worked pain free
I'm very happy and looking forward to setting up the scope and letting it run on different targets to get the most out of my rig.

Great service from FLO. I chose this based on previous reviews here. Using SharpCap I just plugin the USB cable, selected the hardware config and connected. The filter positions can be defined by name, and there are five buttons at the lower rhs of SharpCap for manual filter selection, or the sequencer can be used. Now waiting for the clouds to disperse.

If like me you like to switch between objects, then this is a great addition to have, and as I am fortunate to have a permanent setup, this avoids the obvious swapping of filters as you change object, thus eliminating the possibility of dust getting into the setup.

I use OSC cameras, so with five slots, this allows me to move from Narrowband to a Moon filter!

Setup is very easy and works well with, ASCOM and PC and ASI AIR Pro ( note with the ASI air, lack of ability to rename the slots, so have a plan!)

I bought this to compliment my ASI533MC as I want to be able to swap between a UV/IR filter and the Optolong L-eXtreme filter without introducing dust into my system. The system is well sealed and does not offer any open spaces to allow dust in so long as the rest of the imaging train is affixed.

ZWO include a screwdriver so you don't need to use any other tools to open up the filter wheel. On the inside, there are numbers against each filter slot which corresponds with the index position within whatever software you use to drive the filter wheel. Once I installed my filters, I wrote down the filter position and filter type onto a sticky label and affixed to the outside of my filter wheel so I can remember which filter is where (more on this later). The 1.25" filters are a perfect size for the ASI533MC as the filter wheel is attached directly to the camera.

The system plays nicely with my ASI Air Pro as you would expect. At arms distance the filter wheel makes zero noise when indexing. Sadly, the ASI Air software doesn't allow you to freely name your filter (there's options for L, Dark, R, G, B, S, H, O etc) so right now the L-eXtreme is shown as "2" to indicate the index position number, hence why I put the sticky label on the filter wheel!

All in all, this filter wheel is well worth the money and I cannot see any downsides.

Solid, compact and very quiet in operation. Have used with Astronomik filters without issue.

Great product, absolutely silent and smooth operation, fair price and fast delivery by First light optics to germany. Many thanks!

Bought this to use with Optolong and ZWO filters together with my ASI1294MC Pro .
Really excellent filter wheel and would highly recommend it.