About this product
Model: zwo_dc12v5a_gb_psu
Part Number: ZWO-DC12V5A-GB
ZWO 240V AC to 12V 5A DC Power Supply Unit for Cooled Cameras.
Specifications
Camera side connection: 5.5mm/2.1mm jack
Length of cable: Between camera and PSU, approx 110cm
Input: 100 - 240V, 50/60Hz, 1.5A
Output: 12V, 5A, 60W max
Certifications: TUV, CE, UL, etc.
Plug options:
UK Standard: Supplied with UK standard fused mains plug. It can be used in the UK, Hong Kong, Singapore, Malaysia, Vietnam, Indonesia, The United Arab Emirates, etc.
European Standard: Can be used in France, the Netherlands, Denmark, Finland, Norway, Poland, Portugal, Austria, Belgium, Hungary, Spain, Sweden, South Korea, Russia, etc.
American Standard Can be used in the US, Canada, Japan, Brazil, Taiwan etc.
Chinese Standard: Can be used in China, Australia, New Zealand, Argentina etc.
NOTE: This Power Supply Unit is designed and manufactured for indoor use.
Customer reviews
Average Rating (11 Reviews): | |
Power supply for my ASLair Plus 15 December 2024 | Peter
Another great product at a very good price. First Light Optics shipped the item fast and it was delivered just a few days after it was purchased. A highly recommended retailer I will buy from again, they have an awesome selection and fast efficient order processing.
04 October 2024 | Mark
A bit pricey for a 12v supply but at least you know it's the right one for ZWO products. Usual prompt FLO service!
05 August 2024 | Dennis
One of the old camera power supplies failed. I bought a replacement from an outlet, but looked at it on arrival. I then contacted FLO and asked advice and purchased this recommendation. Pleased I did, it took five minutes to install and connect and the power was there. The build quality is good (SOLID) and it tells you with the green light it is doing what it is supposed to do. I am looking forward to more imaging.
11 May 2023 | Alex
Brought unit to power my ASIAir Mini when at home. No connection issues and work perfectly well. Did think price was a bit high for what it is.
02 March 2022 | Dean
Great service from FLO, arrived very quickly.
It powered my ASI294MM Pro which cooled down to -30℃ fine.
The length of the cable is great, the lead from the camera to power adapter is 120cm. I strapped the power adapter to the leg of the tripod at the bottom to keep it off the ground. The lead from the adapter to the plug is ~170cm which, again, is a good length.
Works well, not a lot else to say about it 21 February 2022 | Jeffrey
Works well & good quality product & service from FLO
Does what it's supposed to 29 July 2021 | Lee
I bought this power pack to power my zwo asiair pro from the mains. It does what it's supposed to and at least I know it's compatible being zwo and won't cause me any issues. A nice length on the cables as you'd expect for a power pack.
It does the job but the cable is too short 20 September 2020 | Paul
As a PSU there is nothing to fault. It plugs in and delivers power to the camera. All good.
My only criticism is the lead from PSU to to camera is quite short. This is an easy fix with an extension, but out of the box it would ideally be longer. Using an extension gives the added bonus of a break point in the cable, which should seperate if anything snags.
So yep - does the job, but is also a little frustrating, There's not much else to be said about a PSU!
08 June 2020 | Sandra
This cable is not a ZWO 240V AC to 12V 5A DC Power Supply Adapter for Cooled Cameras. Advised them item provided not correct , I was told came from ZWO I shared a link for cable at half the price that confirmed 2.5 not 2.1) after mainy emails where i was told that is not the correct size and the cable I was sharing was not what I had been sold( even though the make and model number were exactly the same, i shared a picture that confirmed excatly that and what i had said from the start this cable is 2.5 not 2.1
Response:
The plug size issue was not mentioned until after a number of emails. This PSU is not branded 'ZWO'. It is manufactured for them by a 3rd party (most camera brands do the same).
Had the size issue become apparent earlier in the conversation, we would have realised there was a mix-up with this specific adapter.
We have not previously experienced this issue with these power supplies. We suspect it was a one-off. If anybody else is affected, please let us know. We will happily swap it for you.
17 November 2019 | Andrei
Like all manufactures, this one also has the heavy cable that gets really hard during cold nights. Even at 4-5C it's hard has rock. This can be a problem for your cable management.
Other than that, the power is stable and I have no problem to cool down the 1600MM Pro.
Read all 11 customer reviews...
FAQ
Please fill in the form below to ask a question.