Sky-Watcher Stainless Steel 1.75'' Tripod with 3/8'' thread
  Zoom

Sky-Watcher Stainless Steel 1.75" Tripod with 3/8" thread

£129.00
  (34 Reviews)
✓ 2 year warranty

:  

6x in stock shipped 1-2 working days

About this product

Model:  sw_tripod_3-8_stainless_steel_tripod
Part Number:  20316

A heavy-duty tripod with 1.75" diameter stainless steel legs and a centre bolt connector with 3/8" tripod thread. 

Suitable for use with Sky-Watcher's AZ5, AZ Pronto, AZ-GTi, SA GTi, AZ-GTiX, AZ-EQ Avant and SolarQuest mount/telescope models. 

Also suitable for use with ZWO AM3 and AM5 mounts. 

The tripod extends from 83.5cm to 115cm. It can be used with Sky-Watcher's 21.5cm extension tube (code 20313). 

Includes accessory tray/spreader. 

Customer reviews

Average Rating (34 Reviews):  
Write a Review and share your opinions!

Rating (max 5):  
Tripod
07 November 2024  | 

I thought my heavy tripod would do the job for my Sky-watcher adventure gti, but not to be. So I ordered a new tripod, which is well suited for the job, this came well packaged. I also ordered the extension pillar as well. Again a first class service.


Rating (max 5):  
Solid tripod
15 February 2024  | 

Bought with Sky-Watcher AZ5 deluxe and Star Travel 120/600 for grab and go stargazing.
Provides a solid base.

First rate service from FLO as usual.


Rating (max 5):  
Tripod for EAA rig
06 October 2023  | 

Decided to purchase to use as part of my EAA rig to give my AZI GTI mount more stability than its stock tripod- arrived timely and without issue.


Rating (max 5):  
Very nice and sturdy
05 October 2023  | 

Ordered this for a future AM5. It has 3/8 inch rod that will fit directly. I also got the PE200 extender from FLO and that also fits well with the included adaptor. Received my order in just 4 days and I am in Australia.


Rating (max 5):  
Solid as a rock
17 August 2023  | 

Finally a solid metal tripod! Some of the metal parts have a bit of a rough finish, but the point here is... metal. Not plastic. Good; very good!


Rating (max 5):  
Excellent
01 July 2023  | 

Along with the AZ mount extension this mount has given me a very sturdy platform for my Skywatcher Solar mount and 60mm Coronado Solarmax telescope


Rating (max 5):  
Solid and stable
17 March 2023  | 

I bought this tripod with mount extension to stick my star adventurer on. No more contortions to look through the polar scope. The tripod is solid and well made as is the extension. Should keep me going for a few years as I disappear further down the rabbit hole. Not had any clear skies yet.


Rating (max 5):  
Solid as a rock
18 February 2023  | 

Perfect with my star adventurer


Rating (max 5):  
New tripod for the AM5
07 February 2023  | 

Great tripod supports the Am5 perfectly, great service from FLO.


Rating (max 5):  
An excellent base for the Ioptron Skyguider
07 January 2023  | 

This tripod provides the 3/8" UNC thread fixing (adaptable to 1/4" UNC with an extra accessory), required for the Ioptron Skyguider wedge (and others), supporting its system components and camera and lens/small telescope. Rock solid is an understatement, with tubular legs over 40mm in diameter that outclass the performance of most if not all amateur photo tripods, and at a fraction of the price of one that might. The two part legs fully extended provide a taller platform than tripods. Even fully retracted the 85cm height with legs splayed allows use of the built in Ioptron optical polarscope with less extreme contortions than usual in such systems, sighting Polaris at the steep angles resulting from UK latitudes. I am no weight lifter, but can lift and move the Skywatcher tripod, wedge, camera/wide angle lens and counterweight system with one hand and little discomfort. The only downside is that the tripod won't fold down to fit airline hand luggage requirements but it would be no problem with road transport to dark sky sites. Highly recommended.


Read all 34 customer reviews...

FAQ

Please fill in the form below to ask a question.

*
*
*
*
Please add the two numbers

Q1. Does the iOptron SkyGuider fit on this tripod?

Yes, the iOptron SkyGuider does fit onto this tripod using the 3/8 thread.

Christmas at FLO:    Extended Returns    |    Last Delivery Dates    |    Astronomers Gift Guide    |    Kids Gift Guide    |    Beginners Telescope Guide    |    New Telescope Accessory Guide    |    Gift Vouchers