About this product
Model: dad_flatpanel_ts70_f5_noheater
Part Number: FLAP100-103_TS-OPTICS-F5-QUADRUPLET
Deep Sky Dad Flat Field Panel TS 70mm F5 Quadruplet
Making flats can be quite cumbersome, especially if you stride towards automation and simplification of the process. This flap panel makes acquiring flat frames with your refractor telescope part of an automated routine, without hacks like LCD screens, sky with a T-shirt, etc.
While you image, the flap panel is neatly tucked away next to the refractor tube. When you finish imaging, close it and turn on the (dimmable) LED light. You can adjust the brightness according to your camera responsiveness/gain settings and different filters.
We also provide an optional accessory for those in humid environments: a built-in heater integrated behind the LED light. This feature effectively dries dew from the LED panel and prevents moisture from seeping into the OTA when you close the panel in the morning.
But wait, there’s more! Based on your feedback, DSD improved a few crucial aspects of our flaps with the release of the FP2.
They have replaced the Micro-USB connector with a USB-C connector for more reliable connectivity, upgraded the MCU to ARM Cortex, improved the mechanics, and added advanced features such as obstacle detection, custom open position and automatic end position calibration.
NOTE: Our photo shows the product fitted to a similar-sized telescope, not a TS 70mm f/5 Quadruplet.
Features
- Compact modular design
- Compression rings customised especially to your telescope
- ARM cortex processor for good performance and connectivity
- Cross-platform control panel (Windows, Linux, Mac OS)
- Easy installation (no bolts, 1x hand tightening knob, no fiddly zip ties)
- Dimmable LED light
- Servo motor with 270 degrees of motion and improved mechanics
- High brightness selection resolution (12-bit – 0-4096)
- Manual control with a button
- Built-in magnets, which snap the panel nice and tight when opened/closed
- Custom open position (disabled by default)
- Integrated obstacle detection
- Automatic range calibration
- ASCOM support (up to 6 concurrent devices, with automatic port detection)
- INDI support
- ASIAIR support (optional, with special cable)
- Built-in LED heater to prevent dew accumulation on the LED surface (optional)
- PC connectivity: USB-C cable (included)
- Power requirements: 12V 3A (not included)
Customer reviews
FAQ
Please fill in the form below to ask a question.
.png)
Wish List
95% Positive Feedback
Easy 30 Day Returns
Friendly Expert Support
Competitive Pricing
Fast Worldwide Shipping
