A bit pricey for a 12v supply but at least you know it's the right one for ZWO products. Usual prompt FLO service!

One of the old camera power supplies failed. I bought a replacement from an outlet, but looked at it on arrival. I then contacted FLO and asked advice and purchased this recommendation. Pleased I did, it took five minutes to install and connect and the power was there. The build quality is good (SOLID) and it tells you with the green light it is doing what it is supposed to do. I am looking forward to more imaging.

Brought unit to power my ASIAir Mini when at home. No connection issues and work perfectly well. Did think price was a bit high for what it is.

Great service from FLO, arrived very quickly.

It powered my ASI294MM Pro which cooled down to -30℃ fine.

The length of the cable is great, the lead from the camera to power adapter is 120cm. I strapped the power adapter to the leg of the tripod at the bottom to keep it off the ground. The lead from the adapter to the plug is ~170cm which, again, is a good length.

Works well & good quality product & service from FLO

I bought this power pack to power my zwo asiair pro from the mains. It does what it's supposed to and at least I know it's compatible being zwo and won't cause me any issues. A nice length on the cables as you'd expect for a power pack.

As a PSU there is nothing to fault. It plugs in and delivers power to the camera. All good.

My only criticism is the lead from PSU to to camera is quite short. This is an easy fix with an extension, but out of the box it would ideally be longer. Using an extension gives the added bonus of a break point in the cable, which should seperate if anything snags.

So yep - does the job, but is also a little frustrating, There's not much else to be said about a PSU!

This cable is not a ZWO 240V AC to 12V 5A DC Power Supply Adapter for Cooled Cameras. Advised them item provided not correct , I was told came from ZWO I shared a link for cable at half the price that confirmed 2.5 not 2.1) after mainy emails where i was told that is not the correct size and the cable I was sharing was not what I had been sold( even though the make and model number were exactly the same, i shared a picture that confirmed excatly that and what i had said from the start this cable is 2.5 not 2.1

Like all manufactures, this one also has the heavy cable that gets really hard during cold nights. Even at 4-5C it's hard has rock. This can be a problem for your cable management.
Other than that, the power is stable and I have no problem to cool down the 1600MM Pro.

Nice little power supply.