iOptron Carbon Fibre Tripod
  Zoom
iOptron Carbon Fibre TripodiOptron Carbon Fibre TripodiOptron Carbon Fibre Tripod
iOptron Carbon Fibre TripodiOptron Carbon Fibre TripodiOptron Carbon Fibre Tripod

iOptron Carbon Fibre Tripod

£265.00
  (2 Reviews)
✓ 2 year warranty

:  

Out of stock due 15-20 working days

About this product

Model:  iop_cf_tripod
Part Number:  8061a

NEW iOptron Carbon Fibre Tripod

Provides a lightweight yet sturdy support for iOptron mounts.

The iOptron carbon fibre tripod provides a lightweight yet strong support for the following iOptron mounts: 

  • HEM15/HEM27/HEM44
  • HAE29/HAE43
  • HAZ31/HAZ46  (Including w/ #8042 pier)
  • CEM40
  • GEM45(may limit low latitude application)
  • CEM26
  • GEM28
  • SkyHunter
  • SkyGuider Pro
  • iEQ30/iEQ30 Pro (may limit low latitude application)
  • Camera with 3/8 mounting hole
  • Other equipment with a 3/8" mounting hole

Will NOT fit HAE69/CEM70/CEM60/iEQ45

Collapsed Length: 597 mm (23.5")

Specifications

Adjustable Height  535 - 935 mm (21"- 36.8")
Tube Size Ø40mm (upper) / Ø36mm (lower) (Ø1.6"/Ø1.4")
Weight 2.29 kg (5 lb)
Plate Diamater 120 mm (~4.7")

Customer reviews

Average Rating (2 Reviews):  
Write a Review and share your opinions!

Rating (max 5):  
Solid and light
26 June 2024  | 

Bought this for my HEM27. Very light, and although the spreader plate is high up it is solid as a rock when tightened. The tripod comes with rubber feet on the tripod legs, which can be replaced by some hefty-looking spikes if you are on soft ground. I only needed two of the supplied screw-in pegs - one for the centre post and one for the north pin. These will be stored in the slots on the spreader plate during transportation.
Tip - screw the centre post fully in before tightening the long spreader plate screw to ensure there is enough depth to screw the post all the way in.


Rating (max 5):  
Well built!
01 July 2023  | 

Superb service from FLO as always. Trip is lightweight and very well built. You may need an adater for your mount. I used it with my CEM 26 which i already have a pier extension for. The pier bolted on with no issues. There are 4 different sized pins that can screw into the top plate. Very happy with it indeed.

FAQ

Please fill in the form below to ask a question.

*
*
*
*
Please add the two numbers